Jump to content

Entry for August 2020's Guitar Of The Month is open - ENTER HERE!

Gigabyte

Prs Body Outline Files....

Recommended Posts

P.R.S. Body outline in 4 quarters.... Click me!

Just print them out and piece them together....

After you piece them together it should be 17 3/4 tall and 13 inches at the fattest part.

Edit: Added the headstock and cavity cover. They are not exact, see my next post below...................

It'd be nice if a MOD (or someone) hosted these images so what little bandwidth I have doesn't get eaten up.....

Hope this helps someone...........

Fred

Edited by Gigabyte

Share this post


Link to post
Share on other sites

Ill host them for you Gigabyte! 1gb of space

Share this post


Link to post
Share on other sites

Cool, whenever you post the links up I'll erase mine......

Edit:

I added the headstock and cavity plate (boomerang looking one). Keep in mind these are close but approximated (not exact), unlike the body which I actually traced from the real thing.

I made these by finding clear pics off ebay, tracing them in photoshop and then playing with the size to fit the needs of my project, so what I'm saying is they are not exact but usable and if you can use them, cool :D

http://photobucket.com/albums/v466/shadowninja_x/PRS%20body/

Edited by Gigabyte

Share this post


Link to post
Share on other sites

Sorry, You'll probably call me thick for this question.

But how do you print them out?

i tried doing the body shapes printing from the windows picture viewer, but they dont seem to match up however i do it.

Ta.

Share this post


Link to post
Share on other sites

Print them out in paint!

Share this post


Link to post
Share on other sites

Well I split it up into 4 sheets in photoshop. They should each be within an 8.5 x 11 sheet of paper. After I uploaded them I downloaded them and pieced them back together just to make sure photobucket didn't resize themand they checked out. If you don't have photoshop then I guess try paint as suggested.

I will print them out with windows picture viewer and from explorer aswell to see what happens and see if I can figure something out. I'll probably also add the dimensions for each image on them incase someone needs to resize they can...

Share this post


Link to post
Share on other sites

I think what's happening is that they are saved at 200dpi but non-image oriented programs probably change them to 72dpi by default and that screws everything up. I resized them all to 72dpi including the neck and cavity cover template. Here they are:

http://photobucket.com/albums/v466/shadown...x/PRSbody72dpi/

If you guys print them out and they work please let me know so I can erase the other ones and keep these up.........

Thanks,

Fred

Share this post


Link to post
Share on other sites

I uploaded the images on my server today. Are they the 72 dpi ones?

Share this post


Link to post
Share on other sites

Check the URL you got them from. The last part of the address for the correct album is "/PRSbody72dpi/". I changed all the links I've posted on this board to that album right after I posted the revised images so if you just downloaded them using one of the above links they should be correct. Damn, I sure worded that crappy :D

Did that make sense?

Share this post


Link to post
Share on other sites
They were huge in photoshop but it worked in paint, thanks

you obviously dont know how to use photoshop. Did you auccually use the measure tool see if it's auccually too big or if it just looks too big in photoshop? The resolution of the image is too big so it looks big but it isint.

Share this post


Link to post
Share on other sites

my point is that it works on paint with out doing anything to it, of course I could of messed around with the size on photoshop but im lazy,lol and yer it was the size coz I printed it off and the tip of the horn filled the whole page!! lol

Share this post


Link to post
Share on other sites

To tell the truth, I went thru the trouble of making that template just so I could get the slope at the top right. I didn't use it for anything else because I was only modifying my existing Ibanez GAX neck. I could give you the measurement off of that's but that probably not what you're looking for.......

Edited by Gigabyte

Share this post


Link to post
Share on other sites

If you like it soo much, Donate $10.00. It gets even better! :D

Share this post


Link to post
Share on other sites
If you like it soo much, Donate $10.00. It gets even better! :D

I liked it so much, I donated more than $10...

I wasn't aware that if you donate, you get access to the download section, until I read this post. I had to do a little research to figure out how to donate. This should be made more easily available to everyone. Might get more donations that way. If a link to donate were on every page or something...

Thanks for letting me know about this. In the short time I've been a member, I've got a ton of info. I can't wait to see what's in the download section.

Any info on how to access the download section? Is there a waiting period after a donation is made?

Share this post


Link to post
Share on other sites

if i knew how to work CAD, i'd post my warlock templates, i am sick and tired of not finding warlock templates, and the ones you can find are not accurate, i don't want others to go thru the hassle i went thru:)this forum rocks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...