Jump to content

Entry for July 2020's Guitar Of The Month is open - ENTER HERE!


This topic is now archived and is closed to further replies.


pickup wiring question

Recommended Posts

it is a pickup with four wires running from it.the purpose is that you can wire it (if you want to) to a coil splitter and use it both as a single coil and a humbucker.if you only want to use it as a humbucker you just wire 2 of the wires together and solder them.which 2 depends on the model of pickup.check this schematic out

notice the red and white wires are soldered together.

now look at this one

notice the bridge pickup is wired to the 5 way in such a way that the coils are split

Share this post

Link to post
Share on other sites

  • Create New...