Jump to content

Entry for July 2020's Guitar Of The Month is open - ENTER HERE!


Guitar Of The Month For January

Recommended Posts

The Project Guitar.com "Guitar of the Month" contest is a showcase for all the members, so show us your axe in this thread!

This contest is open to any and all members that enter and will be continued each month for a place showing your creation on the homepage!

The winner(s) of course will have his/her guitar featured on the homepage of Project Guitar.com and if you have a website the picture will link directly to it if you so choose (even commercial site's).

If your a forum member you will also be upgraded to a Featured member which allows you to see the Advanced Chat section and download area.

So show us your creation in this thread! You've got till sometime around the 21st of December then this thread gets locked and the voting starts!

Any Post that is not an entry will be deleted, feel free to start a new thread to discuss any guitar entered this month

There may be more then one poll to determine winners in different catagorys at the end of this contest!

Please post a maximum of your 4 best pictures per guitar entered

Please Give Your Guitar a Name or Nick Name as well :D

Side note, if you are unable to post a picture you can e-mail one to Brian and it will be posted for you, or ask forum members how to post pictures, they are very helpful.

Share this post

Link to post
Share on other sites


Thought I would try this one to see what you all think of it.

The spec

Black Limba body with Quilt maple top black veneer between and an ebony centre line.

Neck is a maple/mahogany 5 piece with a mahogany/black veneer heel.

Ebony fingerboard with aluminium side dots and ebony headplate with double black/maple veneer.

Black Limba control cavity cover.


Schaller 3D roller bridge.

Sperzel locking tunners.

2 ACG fatgit custom humbuckers.

Alnico 5 in the bridge

Alnico 3 in the neck.

Volume and tone with push/pull coil tap and a 3 way switch.

Finish is oil.








Wez swapped round this time me with the guitar,I thought that bass would surface here sooner or later excellent work. Just seen the pic of you we could be twins.


Edited by skelf

Share this post

Link to post
Share on other sites

So its me and Alan up first again :D

Here's the bass specs:

Lacewood body with acrylised maple top + the usual wenge and maple accent lines

3-piece flamed maple neck with wenge acent lines

2 way truss rod and dual CF bars

35" scale 24 fret ziracote fretboard with flamed maple binding

Seymour duncan passive soapbars in wooden covers

Seymour duncan 3-band active EQ





Here it is getting the once over from Paul Reed Smith :D



And some more pics:








Share this post

Link to post
Share on other sites

Woah, where are all the entries this month? Isn't it over today?! WezV and Alan's entries are looking really nice, great finish work on both. Here's one more at the buzzer if there is still time. Another strange guitar from me.

SF3 Travel Body Style

Bolivian Rosewood Top over Butternut Body

Top & Back Roundover w/Comfort & Belly Carves

Gloss Polyester Body Finish

25.5" Scale Length

5 Piece Birdseye Maple/Wenge Neck

Acrylizied Birdseye Maple Fingerboard

2mm Abalone Side Dots

24 Super Jumbo Bell Brass Alloy Frets

High Gloss Polyester

Thick/Fat Neck Profile

2 Way Adjustable Truss Rod

1 5/8" Throat Width

Gold Hardware Finish

Nordstrand NDC Humbuckers

Birdseye Maple Pickup Covers

Bolivian Rosewood Pickup Rings

Elixir 11s

Schaller Locking Strap Buttons

Steinberger Gearless Tuners w/Wilkinson Roller Bridge

Volume with On/Off Switch for each Coil





More (larger) photos including the custom bag my friends at COCAINE MULE made for the guitar here:


Share this post

Link to post
Share on other sites
This topic is now closed to further replies.

  • Create New...