jay5 Posted March 13, 2007 Report Share Posted March 13, 2007 I have 3 fingerboards I don't need. They have all been thickness sanded to .250-.260" and slotted for 22 frets. They are all 1st grade Indian rosewood boards from LMI and are straight and dry. 2 of the boards (pictured together) are slotted to 25" cut off at the nut slot and 23rd fret while the third is for a 25.5" scale also cut at the nut and 23rd fret. All three taper from 2.25"+ at the nut to 2.60"+ at the last fret. 12$ each shipped. 25.5" board I also have a 10' and 12' radius brass fret caul for use with Stewmac's fret press. $8 for both shipped. I accept paypal. Thanks! Quote Link to comment Share on other sites More sharing options...
Daniel Sorbera Posted March 13, 2007 Report Share Posted March 13, 2007 Whats the radius on the 25" fingerboards? (more specifically, the lower one in the picture) Quote Link to comment Share on other sites More sharing options...
jay5 Posted March 13, 2007 Author Report Share Posted March 13, 2007 Ahh, forgot to meention that they are unradiused. Quote Link to comment Share on other sites More sharing options...
jay5 Posted March 20, 2007 Author Report Share Posted March 20, 2007 Make an offer. Quote Link to comment Share on other sites More sharing options...
jay5 Posted March 30, 2007 Author Report Share Posted March 30, 2007 bump Quote Link to comment Share on other sites More sharing options...
weaponepsilon Posted April 1, 2007 Report Share Posted April 1, 2007 PM'D! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.