Jump to content

Entry for April 2020's Guitar Of The Month is open - ENTER HERE!

Archived

This topic is now archived and is closed to further replies.

jer7440

Down Draft Table

Recommended Posts

Here are some pics of the downdraft table I buillt to go with my dust collector.

P1010236.jpg

I made an opening in my bench for the hose to run through

opening

The box is 3/4" plywood with a piece of pegboard for the holes. The peg board is dadoed into the sides and all the joints are sealed with liquid nail. I also used liquid nail to attach the plastic flange to the bottom of the unit

Bottom

Here is the unit connected to my DC and setting in place on the bench

unit connected to the DC

Share this post


Link to post
Share on other sites
Here are some pics of the downdraft table I buillt to go with my dust collector.

P1010236.jpg

I made an opening in my bench for the hose to run through

opening

The box is 3/4" plywood with a piece of pegboard for the holes. The peg board is dadoed into the sides and all the joints are sealed with liquid nail. I also used liquid nail to attach the plastic flange to the bottom of the unit

Bottom

Here is the unit connected to my DC and setting in place on the bench

unit connected to the DC

Looks pretty cool! How well does it work?

Share this post


Link to post
Share on other sites

Seems to work really well, but I haven't spent alot of time sanding on it yet. It will definitely be a step in the right direction.

Share this post


Link to post
Share on other sites

×
×
  • Create New...