ProjectGuitar.com Posted August 25, 2010 Report Share Posted August 25, 2010 The Project Guitar.com "Guitar of the Month" contest is a showcase for all the members, so show us your axe in this thread! This contest is open to any and all members that enter and will be continued each month for a place showing your creation on the homepage! The winner(s) of course will have his/her guitar featured on the homepage of Project Guitar.com and if you have a website the picture will link directly to it if you so choose (even commercial site's). If your a forum member you will also be upgraded to a Featured member which allows you to see the Advanced Chat section and download area. So show us your creation in this thread! You've got till sometime around the 23rd or 24th of September then this thread gets locked and the voting starts! Any Post that is not an entry will be deleted, feel free to start a new thread to discuss any guitar entered this month There may be more then one poll to determine winners in different catagorys at the end of this contest! Please post a maximum of your 4 best pictures per guitar entered Make sure Your Guitar has a Name or Nick Name as well otherwise one will be given to it Side note, if you are unable to post a picture you can e-mail one to Brian and it will be posted for you, or ask forum members how to post pictures, they are very helpful. Link to comment Share on other sites More sharing options...
Jaden Posted August 29, 2010 Report Share Posted August 29, 2010 This is the E.R.O Body: mahogany with maple and purpleheart inlayed to 1/2" deep before carving to the standard original series shape. ebony binding DiMarzio pickups gotoh bridge simulated ivory knobs neck: 3 piece wenge and purpleheart with quartersawn wenge headstock birdseye fingerboard ebony binding ebony nut gold tuners Link to comment Share on other sites More sharing options...
Bionic Dave Posted September 6, 2010 Report Share Posted September 6, 2010 The Tortoise Specs: 7 String MultiScale 27.5 - 25.5" with 27 frets Oil finish Body: 5 Piece Laminated body Black Limba / Cocobolo / Wenge / Cocobolo / Black Limba Carved Top Magnet wood cavity cover. Neck: 5 Piece Laminated neck reverse headstock. Wenge and Cocobolo Black Limba backplate Mother of Pearl truss rod cover Custom Tortoise Inlay in the 12th fret position, made from MOP and Cocobolo. Hardware: Bridge is 7 ABM single chrome Chrome locking tuners 2 push/pull pots for volume and tone, and mini 3 way switch for tapping and phase Bone nut custom wound pickups from ebony Link to comment Share on other sites More sharing options...
Ricky Anderson Posted September 20, 2010 Report Share Posted September 20, 2010 ORANGE LADY 24 frets 7 strings multiscale (24.75"-27") in ergonomic style BUILDER: Ricky Anderson SUPERVISED BY: Gilles E.D. de Neve (ASIA GUITAR LABS) BODY: -3pcs chambered mahogany -2pcs bookmatched maple top -string thru body with brass ferrules -orange dyed (top) and weathered brown (back) -black plastic cavity cover (not shown in the pic) -oil finish -strap pin and jack input located on the back of body to maintain clean look NECK: -5pcs mahogany-maple-mahogany-maple-mahogany, asymmetrical shape -macassar ebony, no radius/ dead flat, inlay free -AANJ -oil finish HARDWARE: -custom individual bridge (duralumin rails with brass saddles by ALDRIDGE EMPIRE) -grover chrome tuners -ebony nut -stewmac jumbo frets ELECTRONICS: -Ibanez Pickups -Charvel style 5 way switch (universaljems) -CTS vol pot 500k -killswitch no fancy black backdrop on the pics, straight from my room. maximum of 4 pics per guitar entered, I followed the rules. CHEERS!!! Link to comment Share on other sites More sharing options...
Hitone Posted September 20, 2010 Report Share Posted September 20, 2010 THE SHERIFF About: The Sheriff is the first of a series of western themed guitars. It's a thin hollow body guitar that's made up of some interesting woods: Anigre, Spalted Maple, Texas Ebony (Pithecolobium flexicaule) and Walnut from a door company. Besides the pickups and the electronics everything else was handmade. Next guitar will be the Outlaw! Body: Spalted Maple Top Walnut back Recurved top Oil Finish Neck: 5 Piece Laminated Anigre and Walnut Texas Ebony plate and truss rod cover MOP sheriff star Inlay in the 12th fret position Oil Finish Hardware: Mini Humbucker pickups Bridge is handmade from Texas Ebony and bone Black Sperzel locking tuners Volume, Onboard "SRV" Tone knob, and Nickel Texas Star 3 way switch Bone nut Link to comment Share on other sites More sharing options...
sdshirtman Posted September 22, 2010 Report Share Posted September 22, 2010 I humbly submit my first build. The Dimple Its named after a small flaw in the finish. Build thread here Body 2 piece mahogany. 1.5" thick. Mild burst done in water based hand rubbed dye. Finished in clear nitrocellulose lacquer. Brass inserts and machine screws in cavity cover. Copper shielding. Neck 5 piece laminate, maple/walnut. Mahogany truss cover. Graphite nut. MOP markers Ebony fingerboard. 2 way truss. 24.75 scale/22 frets Hardware Duncan TB-14 bridge/ SH-2 jazz neck One tone, one volume, 500k pots .049 cap 3 way toggle switch Gotoh Tune-O-matic bridge & tailpiece and 510 med 18/1 tuners. Schaller straplocks. The guitar weighs in at roughly 6.5 lbs. Link to comment Share on other sites More sharing options...
ProjectGuitar.com Posted September 24, 2010 Author Report Share Posted September 24, 2010 Time to Vote click here Link to comment Share on other sites More sharing options...
Recommended Posts