reamer Posted March 27, 2013 Report Share Posted March 27, 2013 Nothing special here - but I have not seen anything else built like it - so I thought I would post for ideas. It was inspired by Wayne Charvel from some older videos I had from the past. Guitar spins 360 and also swivels 360. You can see a video here... http://youtu.be/PIRDHSVqAzc Quote Link to comment Share on other sites More sharing options...
Ripthorn Posted March 27, 2013 Report Share Posted March 27, 2013 Some people convert auto engine stands to work in this fashion. Sure makes things easier to wrangle. Quote Link to comment Share on other sites More sharing options...
Mender Posted April 1, 2013 Report Share Posted April 1, 2013 That is a similar idea to the Stewmac guitar holder http://www.stewmac.com/shop/Finishing_supplies/Equipment:_Spray_equipment/Freehand_Holder.html?actn=100101&xst=3&xsr=269925 Quote Link to comment Share on other sites More sharing options...
FireFly Posted April 19, 2013 Report Share Posted April 19, 2013 I like it! I've been using an old bench press set. I attach a threaded rod to the rear strap button, and a crank handle with a flat end to the neck joint. I can rotate my stock like a rotisserie. I like this one more though, because you can stand in one spot while you rotate it on a horizontal plane, and not just a vertical. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.