Jump to content

Entry for October 2019's Guitar Of The Month is now open!
ENTER HERE

bileshake

Making The Most Of Early 80's Gibson Neck Pu.

Recommended Posts

I recently picked up an 84' designer series gibson flying V. My first V and yes I love it. Other than the selector wired backwards, the electronics seem to be in good shape but I decided to replace the bridge PU with a Dimarzio tone zone. Works like a charm and sounds amazing. The stock neck pickup howls feedback like crazy with my hi gain loud volumes and has too much low end. I'd like to save the stocker, I don't use the neck PU for anything other than a weaker vintage sound so the tone is ok just too bassy.

I'm thinking of wax potting the bucker and maybe experimenting with a cap in series. I have the tools to do the wax potting so I will start with that but I haven't done anything with caps before.

Any advice?

Share this post


Link to post
Share on other sites

decide what freq you want to be the cutoff range. 70hz use the rc filter formula to find what cap you need for your pot. if its 500k use a .0047uf in series from pickup output to pot or switch depending on your wiring diagram. http://www.muzique.com/schem/filter.htm i have been using this trick for years and its ootw

Share this post


Link to post
Share on other sites

have you potted it yet

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...