Jump to content

Entry for April 2020's Guitar Of The Month is open - ENTER HERE!


Help Fingerboard for a 7 strings

Recommended Posts

Hi all,

this is may very first post so sorry if i am in the wrong part of the website and sorry for my poor english :)


I have just done 5 different guitars Fully handmade, This time I would like to create the fingerboard with cnc (5way) . Since I'm not able to draw the project, I wonder if anyone is so kind to draw the following fingerboard for me: (I'm sure I will learn to use cad design programs but I have this compelling project that I would like to finish as soon as possible)
7 strings - gibson scale 24.75" -  24 frets -  20 of radius - the nut width 1 7/8"


Please Help Me!




Share this post

Link to post
Share on other sites

To the best of my knowledge, a radius on a fret board can only be achieved two ways on a CNC. Either the Z axis travels in an arc as it tracks from left to right across the face of the fret board:


Or the cutter moves along the length of the fret board at discrete heights and creates a staircase pattern that approximates the intended radius which must be later processed to remove the ledges created by the cutter:


The first method would result in less work, but would take longer to complete. The second would be quicker to complete, but requires more effort to finish off.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...