Jump to content

The vote for 2018's Guitar Of The Year is now open - vote here!
Entry for January 2019's Guitar Of The Month is now open - enter here!

Andyjr1515

Another Swift Lite Bass

Recommended Posts

Hi

This is a bit of a catch up.  With the distraction of newly acquired grandparenting duties and a couple of fairly tight build deadlines, I'm afraid that my forum posting has been a bit lax. 

This, of course, will have been to the great relief and delight of all of the forum members who struggle, understandably, with the crazy world that is Andyjr1515's ramblings.  But, in the same way that Mr Kellogs believed that too long a break from colonic irrigation was no good at all for his followers, I think you've had a good enough break from my projects and it's time to get out the warm water, funnel and rubber tubing and get back to peeping through the windows of the madhouse. :D 

Another Swift Lite Bass.  Hmmm, OK - I can let everyone back in gently.  There is no point in me doing an overly detailed build diary because it's pretty much the same as the one I finished earlier in the year for Neil (below) and for which there is already a tortuously long thread on the forum:

_MG_5779.thumb.JPG.686f67e92e52c31d3ca87e7a7091ca51.JPG

After the No Treble 'Bass of the Week', I got a number of enquiries for similar builds - probably because of the lightweight aspect.  One enquiry - a player in Hawaii - came to fruition and this has been progressing over the past couple of months.

It is the same basic spec, but a just slightly different shape for the horns and cutaways and it will be P-J rather than J-J pickup configuration.

A quick photo story up to the present status:

25660740_Version4on21Sepwithraisedlowerboutcopy.thumb.jpg.adfbc97ea2819ecfd733cd99dca3bcb7.jpg

 _MG_6456.thumb.JPG.b97c320109ccc24907f637e19a0ef48f.JPG

_MG_6595.thumb.JPG.9f551520887f49a9f1b6a50281649e76.JPG

_MG_6816.thumb.JPG.eaaf5917f460a6a12dc49cf081dc0076.JPG

_MG_6709.thumb.JPG.9f112b4b8ae2feb61ae2db221283119a.JPG

_MG_7012.thumb.JPG.2894cbf2f4d735261aad64d6ea50548e.JPG

_MG_7050.thumb.JPG.daa819ffdfb1e6a5a70e0caa5346b6fb.JPG

_MG_7124.thumb.JPG.3d11f09b4ac59e1ecbf73c85ad09153e.JPG

The above picture is the present state of play - and it's not as complete as it looks.  I've only lightly fitted the strings to check the spacing and get the positioning for the next scary bit - cutting the P-J pickup chambers.

However, it is complete enough for me to be able to estimate the final playing weight - around 6.5lbs :)

There - that wasn't so bad, was it... :D

 

Andy

 

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, Andyjr1515 said:

This, of course, will have been to the great relief and delight of all of the forum members who struggle, understandably, with the crazy world that is Andyjr1515's ramblings.  But, in the same way that Mr Kellogs believed that too long a break from colonic irrigation was no good at all for his followers, I think you've had a good enough break from my projects and it's time to get out the warm water, funnel and rubber tubing and get back to peeping through the windows of the madhouse. :D 

<_<

:killinme

Bring 'em on Andy. I always look forward to your most recent observations.

And congrats on the newly acquired grandparenting duties. I'm rather new to that myself.

SR

  • Haha 1

Share this post


Link to post
Share on other sites

This is still bubbling along in the background. 

James - the customer - had sent me an Aero P-J set from the States - don't think they are on the UK radar.  He took them out of a bass he particularly likes the sound of.  No pressure there, then.

I cut the chambers in my normal way - no template and only routing to smooth and deepen the bottoms once the basic chamber has been cut.  Basically, I:

  • draw the pickup outline in pencil on the bass top taking care to square up and get the poles in exactly the right place for the string runs
  • drill at all corners and lugs to full chamber depth
  • forstner inside the pencil line to 3/4 depth
  • chisel the top c 1/2" deep, following the pencil lines and joining up the previously drilled corners
  • use a bearing-guided trimmer bit - now completely captive in the chamber - in the router to tidy up the sides and deepen to final depth

_MG_7166.thumb.JPG.764e449e59f98220c85009c84bb8db94.JPG

_MG_7171.thumb.JPG.c870a9b8acb48c152edd2ae2e865e182.JPG_MG_7173.thumb.JPG.4578c0140fa6f3cedde8a0bd58f1c001.JPG

 _MG_7176.thumb.JPG.f7b28efbd213a3d4473e45ef986dcad8.JPG

 

Then took a slice off an offcut from the top to create the control chamber hatch:

_MG_7116.thumb.JPG.a7980df51b65693177a789c36a2aea9c.JPG

 

Then started the carve of the neck / body transition and upper fret access:

_MG_7276.thumb.JPG.15b5fca58946b1a301e91e05bf247987.JPG

So at this point, it's starting to look like a bass:

_MG_7315.thumb.JPG.ffbff579dc136534c29b2b06356198fc.JPG

_MG_7314.thumb.JPG.ae12f35399ee9a1d1cb8cefe3e47acee.JPG

 

Next, the debate about fretboard / neck colour and the commencement of the finishing process - which I'll cover in the next post and which will get the thread fully up to date :)

  • Like 1

Share this post


Link to post
Share on other sites
5 hours ago, Andyjr1515 said:

Then started the carve of the neck / body transition and upper fret access:

_MG_7276.thumb.JPG.15b5fca58946b1a301e91e05bf247987.JPG

 

Bravo! Very nicely done.

I love this!

SR

  • Thanks 1

Share this post


Link to post
Share on other sites
14 minutes ago, ScottR said:

Bravo! Very nicely done.

I love this!

SR

Thank you, Scott :)

I have to say it's great in terms of access to the top frets :)

Share this post


Link to post
Share on other sites

One of the things that James, the prospective owner, wanted was a strong amber stain for the neck and fretboard and also a complementing stain for the back and sides.  For the fretboard, he sent me a photo of the type of shade he was looking for which I was able to match using a mix of spirit stains (Chestnut Stains light mahogany/yellow/orange, all thinned with methylated spirits) 

Because of the different hues of the ash (brownish) and maple (yellowish) I had to also do a few more trials to get a mix that coordinated with that colour.

This is where I ended up - happily coinciding with where James was wanting to be :)  :

_MG_7440.thumb.JPG.e36e563e96988a4d7b8ce4460eaf2eb5.JPG

_MG_7446.thumb.JPG.bd75d05a6c78008412f26f2a7540d4a1.JPG

The 'knobs' are just loosely positioned at the moment while we discuss his preferred positioning.

The 'slurry and buff' coats of tru-oil will continue over the Christmas period and then the final tasks can be tackled.  

I'm planning on ready to ship mid-Jan.

For those who celebrate Christmas - have a great Christmas and see you the other side!

:)

 

Andy

  • Like 1

Share this post


Link to post
Share on other sites

By the way...

_MG_7440.thumb.JPG.f5b621facd6c00e7da1e2f4b9333c370.JPG

...it isn't too much Christmas spirit getting into me -  the neck IS parallel and the hatch IS straight (just had to check it for the 14th time to make absolutely sure).  It's just the camera / viewpoint distortion... :thumb:

  • Like 2

Share this post


Link to post
Share on other sites
On 12/24/2018 at 6:40 AM, Andyjr1515 said:

By the way...

_MG_7440.thumb.JPG.f5b621facd6c00e7da1e2f4b9333c370.JPG

...it isn't too much Christmas spirit getting into me -  the neck IS parallel and the hatch IS straight (just had to check it for the 14th time to make absolutely sure).  It's just the camera / viewpoint distortion... :thumb:

For some reason, that happens to me all the time. And one never notices until after posting.:blink:

SR

 

  • Haha 1

Share this post


Link to post
Share on other sites

Well - pretty much on the final furlong with this.  I'm progressing up the tru-oil slurry grades of wet and dry - next one at 1500 and last one at 2000.  They should be done by the weekend.  In the meantime, I've been knocking jobs off the 'to do' list.

I've put the Luminlay dots in:

_MG_7498.thumb.JPG.4e4597edfd5f629d95f983846ee0b595.JPG

 

I've done the knobs (still got to put the 2mm black-pearl marker dots on):

 

_MG_7513.thumb.JPG.5863eb1a6916fe9f32dce7a937f75e01.JPG

_MG_7518.thumb.JPG.9a88d151e7bf3631cda8450ab8ad32f1.JPG

 

Recessed the jackplate:

_MG_7558.thumb.JPG.837adc42a751bbe7b388df110552745b.JPG

 

Put magnets on the truss rod cover:

_MG_7568.thumb.JPG.0cdf4a862195896fe8c8b5babcf1be05.JPG

 

And magnets on the copper-lined control chamber cover:

_MG_7569.thumb.JPG.1662b17d5a47965a2ff0b1ef3acb5a43.JPG

_MG_7570.thumb.JPG.37899ff4d2b41a1d2a7d94caa01f6a92.JPG

 

With luck, this will be all complete by the weekend :)

  • Like 3

Share this post


Link to post
Share on other sites

And another job off the tick list - the frets levelled, re-crowned and polished. 

_MG_7573.thumb.JPG.af53bcb153dc673d7ef543544c60723d.JPG

I'll fit some strings temporarily later today to check if it frets properly all the way up the board.

Only a few jobs left before the 'grand assembly' :)

 

  • Like 1

Share this post


Link to post
Share on other sites

wow, looking great!  noticed some details I didn't catch b4... recessed football, magnet-truss cover... very professional.

  • Thanks 1

Share this post


Link to post
Share on other sites
20 hours ago, mistermikev said:

wow, looking great!  noticed some details I didn't catch b4... recessed football, magnet-truss cover... very professional.

Thanks @mistermikev !

 

  • Like 1

Share this post


Link to post
Share on other sites

Sorted the nut height and then put my 'see if it all fits together' set of strings on.

At my action height starting point (medium) there are no buzzes at all so I think the basic levelling job was OK.  When the proper strings are on, I'll set it up properly and do a double check with the fret rocker and the buzz check at low action in case there are some high spots anywhere.

This is how the tru-oil slurry and buff has ended up, finishing at 1500 grit.  This is an oblique shot to the light so you can see the surface finish:

_MG_7597.thumb.JPG.3d8ca82e354115b0446ddc71d2144325.JPG

...and then face-on to see the figuring:

_MG_7602.thumb.JPG.ad89d38e99427215c74acbf8dc4ecd69.JPG

 

It's LOVELY to the touch. :)

Still got to do the final 1500 slurry and buff on the back - and I've still got to do the final buffing of the fretboard and neck - but this is how the whole thing is panning out:

_MG_7587.thumb.JPG.44eb4274910066d17670498d6fac347b.JPG

_MG_7588.thumb.JPG.3b5c6536712de7d10e5207f15cbeb60a.JPG

All being well it should be finished by the end of the weekend

Share this post


Link to post
Share on other sites

That's an absolute stunner Andy, one of your best. I love how the black fret markers and hardware work together, and the void fills in the burl even add to that look. As well does the black inlines and borders you've used in the details.

Bravo!

SR

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
3 hours ago, ScottR said:

That's an absolute stunner Andy, one of your best. I love how the black fret markers and hardware work together, and the void fills in the burl even add to that look. As well does the black inlines and borders you've used in the details.

Bravo!

SR

Thanks, Scott

Means a lot... :)

  • Like 1

Share this post


Link to post
Share on other sites

Just doing a couple of tweaks and the final checks and it'll be pretty much ready to go!

It sounds great.  James asked for heavyweight strings to be fitted and, with his supplied Aero pickups it sounds really good - even through my non-bass rig!

Here are some of the obligatory finished pics (except one change in progress):

_MG_7619.thumb.JPG.aec2871714cf49f4632428f36d7d2228.JPG

_MG_7628.thumb.JPG.241949b4d7bf6aa50facbe0b078d0565.JPG

_MG_7625.thumb.JPG.8637a5b4ea942bd01ed53e39a8760ddd.JPG

_MG_7652.thumb.JPG.1e85631ae79b4e415f6beb463a8fe3cd.JPG

_MG_7644.thumb.JPG.ef0a3e586b2f8c40ff15aef9e9f936be.JPG

_MG_7621.thumb.JPG.2023569caf1e241c65afafda1a9f0a71.JPG

The one change is that James asked if I could try a coordinating control chamber cover with back wood rather than a contrasting one with top wood - this is what he's gone for and is being finished at this very moment :)

_MG_7664.thumb.JPG.52f266d907a64299ccaf08b60bb34caa.JPG

 

Should be shipping very early next week :)

Andy

 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×