ashen Posted February 6, 2019 Report Share Posted February 6, 2019 hey guys i am new to the forums i checked out many build logs there is awesome stuff you guys are making i want to ask that anyone knows about veena it ia an indian musical instrument Quote Link to comment Share on other sites More sharing options...
Norris Posted February 7, 2019 Report Share Posted February 7, 2019 From https://en.wikipedia.org/wiki/Saraswati_veena Quote Construction About four feet in length, its design consists of a large resonator (kudam) carved and hollowed out of a log (usually of jackfruit wood), a tapering hollow neck (dandi) topped with 24 brass or bell-metal frets set in scalloped black wax on wooden tracks, and a tuning box culminating in a downward curve and an ornamental dragon's head (yali).If the veena is built from a single piece of wood it is called (Ekantha) veena. A small table-like wooden bridge (kudurai)—about 2 x 2½ x 2 inches—is topped by a convex brass plate glued in place with resin. Two rosettes, formerly of ivory, now of plastic or horn, are on the top board (palakai) of the resonator. Four main playing strings tuned to the tonic and the fifth in two octaves (for example, B flat-E flat below bass clef - B flat- E flat in bass clef) stretch from fine tuning connectors attached to the end of the resonator across the bridge and above the fretboard to four large-headed pegs in the tuning box. Three subsidiary drone strings tuned to the tonic, fifth, and upper tonic (E flat - B flat- E flat in the tuning given above) cross a curving side bridge leaning against the main bridge, and stretch on the player's side of the neck to three pegs matching those of the main playing strings. All seven strings today are of steel, with the lower strings either solid thick. If you were to try to make one, it would certainly have a lot of interest on here! Quote Link to comment Share on other sites More sharing options...
ashen Posted February 7, 2019 Author Report Share Posted February 7, 2019 I have desgined body of one in solidworks but i am looking for help with a cnc machine. Quote Link to comment Share on other sites More sharing options...
ashen Posted February 14, 2019 Author Report Share Posted February 14, 2019 I have designed the 3d model of veena in solidworks i am attaching a link check it out guys https://www.schneiderguitars.com/veena.asp 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.