Aftersun lotion Posted June 24, 2019 Report Share Posted June 24, 2019 Hey, I need some help with this classic set. Bought this set used and my question is can I solder these two red wires together demonstrated in the picture? At the moment the red wires that connect together from the pickups and then are supposed to continue to the battery - are separated. In the schematic the black thing holds these red wires together. Easiest way would be just to solder dem red wires together. Any advise? Thanks Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted June 24, 2019 Report Share Posted June 24, 2019 Searching by the image I could find several ones where the black bar is marked with a text "All red wires join here". So apparently yes, soldering and isolating the join with heat shrink tubing or electric tape is a viable option. Crimp tube is another. A knot is not. 1 Quote Link to comment Share on other sites More sharing options...
mistermikev Posted June 24, 2019 Report Share Posted June 24, 2019 that is the positive lead for the battery... both pickups have to have pos leads touching battery... if not... they no worky. how you connect them... wire nut, solder/shrink-tube, just twist them... is up to you. 1 Quote Link to comment Share on other sites More sharing options...
Aftersun lotion Posted June 25, 2019 Author Report Share Posted June 25, 2019 23 hours ago, mistermikev said: that is the positive lead for the battery... both pickups have to have pos leads touching battery... if not... they no worky. how you connect them... wire nut, solder/shrink-tube, just twist them... is up to you. Very helpful, thanks for the answer! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.