Jump to content

Entry for October 2019's Guitar Of The Month is now open!
ENTER HERE

arman

Need Help with ltd EC1000 PIEZO

Recommended Posts

Hi,
I've got my ltd EC1000p several months ago and everything was working fine. but the other day when I plugged my guitar in JACK 1 with mono cable the magnetic pickup didn't work. when I use the mag/piezo selector only piezo pickup have sound. It means I don't have the blend of both magnetic and piezo or magnetic pickup right now. please help me with this. what could be the problem?

it is good to know that when I use JACK 2 the magnetic pickups work fine and when I use a stereo cable in JACK 1, just piezo pick up have sound and nothing is coming out of magnetic pickups.

I appreciate any help on this.

original.png?1486745417

Share this post


Link to post
Share on other sites

Can you push the plug any deeper into Jack 1 while trying to get a sound?

Since the tip of the plug is for the magnetic pickup when using a stereo cable it sounds like the tip isn't touching the furthermost connector inside the jack. Either the connector has bent/broken or the wire for it is loose. Open the control cavity and look for any loose wire ends.

Share this post


Link to post
Share on other sites

open it up and inspect.  more than likely the mono jack has been disconnected or perhaps is making contact with the shield.  ask youself: what changed?  new cable?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...