Bizzar_Guitars

Thanks for the compliments guys. Scott, the 'eyes' are made from a piece if 1/2" plexiglas with a prupleheart 'iris' and a figured maple 'pupil' with a thcik coat of spray poly over the top of them. The single LED that provides light to the fibre optics in the 'pupils' is located in the jack plate cavity on the back of the top wing. This LED is always on, and light shines out through the jack, and makes 'finding the hole in the dark' much easier. Prostheta, I agree about the string pull, I didn't like the way the 'Widow' string pull looked, or functioned.

Here’s one of my latest works in progress, Hades. Hades, the Greek King of the Underworld, the god of death and the dead. Hades Specs 24.75" scale, 5 Piece Laminated Neck Through (Purpleheart, Maple and Mahogany) all reclaimed woods Off set ‘D’ profile with a Figured Bird’s eye Maple fretboard (Compound Radii - 12" @ Nut - 18" @ Body) Mahogany, Maple and Purpleheart binding 24 wide/high frets (+ Zero fret) 44 mm wide black Corian nut 3 mm LED (aligned between top two strings) with Fibre Optics in silver tubing side dots (lit from fretboard LEDs) 12̊ headstock angle, 3̊ body angle Single action truss rod with a Spoke Wheel adjustment nut @ Headstock Chambered Mahogany and Roasted Maple body with figured Maple core and Wenge & Figured Maple stringers Black Tune-O-Matic bridge, Tuners, String Ferrules and Strap buttons Bizzar Humbuckers with matching pickup bobbin tops with ICS (Individual Coil Selection) switches 3 way pickup switch & Switchcraft stereo jack mounted in custom jack plate in the back of the top wing 2 - 500K Audio taper Volume pots, 1 - 500k Master tone pot with 0.23 Tone Capacitor and treble bleed circuit Knobs made from neck through off cuts Mahogany Control Cavity cover, matching back wood grain attached with embedded rare earth magnets 2 AAA rechargeable batteries inside control cavity 1 on/on/on mini toggle switch (for LED colours) Stereo jack in custom jack plate turns LEDs on when 1/4" jack inserted Hand rubbed Tung Oil finish Here’s some pics of the build process: Rough pencil sketch originally based on a bastardized B.C. Rich Beast CorelDraw plan with specs (it was originally going to be have three humbuckers) Start date in truss rod channel @ the 12th fret (notice the nail hole in the top piece of Mahogany) Width of neck laminates 66.6 mm (so appropriate for something called Hades eh?) Roasted Maple top wood for wings from KJP Hardwoods 2 wings from 6" Mahogany also from KJP Hardwoods, the bottom wing pieces was flipped once cut Pickup wiring channels pre-cut in Maple core, eliminates having to drill those angled holes Wing laminates before glue up with Maple and Wenge stringers, pickup cavities rough cut with Radial Arm Saw Headstock with ears on and B.C. Rich Widow shape drawn on for size comparison New headstock design with tuners mounted Headstock rough cut Headstock horns and tail (it IS called Hades after all) rough cut LEDs laid out, a Forstner bit makes a neat cavity for the resistors. The side dot holes were drill before the binding went on. LEDs with resistors LED array lit up red. This isn’t the fretboard that will make it to the final product. Jack plate block made from neck through off cut. Jack plate block first cuts done on the table saw to define the lip depth and cavity width Bottom view of Jack plate with jack Top of Jack plate with jack and rough cut 1st generation knob. This knob will not make it to the final product. Jack plate test fit in back of top wing Bobbin tops and bottoms clamped together with bolts and nuts for consistent shaping of all pieces Baseplate ear rough cut away. No mounting rings, the screws will pass through the maple stringer for height adjustment. 2nd generation knobs test fit The neck through thickened with a piece of Wenge at the body end, due to limitations in the size of reclaimed wood used. Neck profile 1st “cut” done with 40 grit sand paper in a Random Orbital Sander produced a trapezoidal contour. Rough shaped volute, I like the way the Maple looks book matched, notice another nail hole in the Mahogany. Left eye with Fibre Optic “pupil” lit by LED in behind jack plate Eyes backlit with LED mounted under each eye, and Fibre Optics for the pupils lit LED behind jack plate Bridge, knobs and pickups test fit. The pickups have a piece of tape over them just for the picture. I will post more pictures as the build progresses. Thanks for looking. Ciao, Garth

Absolutely WOW! Completely stunning! All the added details are just spectacular. Very inspiring! Thanks for sharing. Ciao, Garth

Awesome job! Very neat work. I really like your binding and carve combination, and how the headstock binding and fretboard binding lineup, sweet! The headstock inlay looks great off set to one side. Great work!

Just a thought, but if you use a 'zero' fret, then you'd only have to ground one string.

Fantastic! Really like the headstock binding, and the bevel on the back.

Nice! Congrats on such a high profile customer.

Absolutely Stunning! I especially like the F hole and the back carve, among everything else. The tuner 'feature' was an impressive work around. Ciao, Garth

I'm totally stoked! Here's a review of Luna from its new owner John Hughes of Daisy Train. "My very own line of Bass Guitar! I've been playing this all week! I have to say I am quite impressed. The neck is perfect with a bit of a groove in the back for comfort, and seriously, for a guy like me with tendonitis, it was so much more comfortable. The sound is alive and present with punch and articulation. The wide frequency response of the pickups allows you to shape your tone from punchy and aggressive to soft and mellow. Every note is balanced and smooth. The different sounds I get from the pickups... I've never had a bass that can do that. The woodwork is incredible and it shows and adds to the clarity and tone of this bass. My dad is a carpenter... he was amazed too. Along with it's stamped "Handcrafted for John Hughes" and numbered 001 on the back of the headstock it comes with a custom case! Thinking of getting a guitar or bass? Get exactly what you want! You'd be crazy not to go to Bizzar Guitars!'

Thanks for the compliments!

Thanks for the compliment. Here's a couple of pics with the LEDs on:

Way back in the fall of 2007, I was approached by John Hughes of Daisy Train about making him a custom neck-through bass, based on Hamer Impact. At that point, I had only ever made neck-through guitars, and wasn’t sure if the laminating method I was using would withstand the tension of bass strings. Also, at this point, my youngest daughter was about to start taking music in school, and wanted to play guitar. \m/ \m/ She liked my Poseidon design, but the 27" Baritone scale and “Fat Finger”™ string spacing was too big for her hands, so a 25.5" scale version (Poseidon II) was made. My daughter took Poseidon II to school for her first music class, only to have the teacher tell her that they didn’t teach guitar, only bass. So I made her a bass, Jove. Jove was a test, to see if the neck laminates would stand up to the tension of bass strings. Apparently, it passed the test. So, on to John’s bass. Because I like to think I’m unique, just like everybody else, I prefer not to make copies of other designs, but John was set on this design. I told John I’d make him a ‘Bizzar’ version, it looks enough like one to see the resemblance, and he went for it. Specs Based on a Hamer Impact bass * 34" scale * 7 Piece laminated neck-through (Figured Maple, Jatoba, Maple & Purpleheart) * Mahogany Back * Figured maple front * Wenge Stringers * Tigerwood (Gonalco Alves) Fretboard * 24 frets * Acryllic-in-steel inlay * BadAss bridge * 2 over-wound Bizzar Humbuckers * 2 Individual Coil Select (North/Humbucker/South) mini toggle switches * 1 phase (In/Out) mini toggle switch * 3-way toggle * 2 individual volume * Corian Nut * Gotoh Tuners * Tung oil finish Wiring Diagram: http://guitarmodder.com/beta/diagrams/test-2 Ciao, Garth

I used staples, with the tops cut off. From my Jove build : http://projectguitar.ibforums.com/index.php?showtopic=44402&st=0&p=478638&hl=daughter&fromsearch=1&#entry478638 To prevent the wings from slipping during clamping, staples are inserted: The head of the staples are cut off: After cutting the tops of the staples off leaves two little nibs: The wings are aligned and dry clamped to the neck blank. During dry clamping, these nibs, leave impressions in the neck blank, making register marks to align and keep the wings from slipping during glue up. The same process was used to glue the top and bottom of the wings, the pencil marks indicate where the staples are: Ciao, Garth

Oops Link fixed. Thanks Dave_B.

I haven't been able to build anything recently, but I put together my version of "How to build a laminated neck-through electric guitar" on my web page. WARNING: Picture Heavy Check it out: http://www.bizzarguitars.ca/index.php?option=com_content&view=section&layout=blog&id=13&Itemid=64 Ciao, Garth