Dward13

Got a start on a new body. A four layer sandwich: 3/8 in. figured maple, 1/4 in. walnut, 3/4 in. white ash and hard maple backbone, 1/4 in. walnut with center accents. Should give the appearance of bindings.

Here is my SB190. (Solid Body Single P-90) This was my warm-up project after a 20 year rest from guitar building. Body is mostly flame maple with a Birdseye backbone. Neck is a stock Fender MIM telecaster. Pickup is a Seymour Duncan P90. To be honest, I like the look of Asdrael’s “Birthmark”, it’s simple and I do like the look of Ash. I know he can’t win unless someone runs against him, so I offer the SB190 to fill that role. I managed to capture the GOTM for June, which is plenty for me, so don’t hesitate to vote for the Birthmark guitar.

I've been working on learning how to work with stain. Been thinking of a Blue-Green-Yellow burst type pattern. Got some Keda stains, the liquid kind, don't really like the "Amber Yellow", doesn't mix with the blue very well to make a green shade. However, with a sanded back light brown base, it does make a nice goldish color, looks kind of vintage. Ordered some of the Keda powdered stain to try those as well. Been trying the Angelus stains, having a little more luck. I was initially thinking of airbrushing the stains, but after watching a bunch of YouTube vids, I'm starting to see how you can blend colors with just a cloth applicator. In several videos they talk about "the steel wool trick", what's the deal with that. As far as I can figure it's helps blending colors, or fading specific areas that are to dark maybe.

Andyjr1515, have you by chance ever used the GraphTech system alone without any magnetics? I'm installing all the switches etc. just in case someone wants to add magnetics in the future. Also, now that I've got a working drum sander I stated playing with my stash of top woods.

Everything in the GraphTech kit is prewired with the connectors. Probably would be a little tricky to shorten the leads.

Punched out the holes for the pots and switches. Now, to figure out how to cram all this stuff in the control cavity.

Got a new shop helper: SuperMax 16-32 Drum Sander. I've had a Delta X5 sander since 2004, but it's been a constant pain as it was a very bad design. Funny Story: I used the Delta sander for a couple years then these gears that raise and lower the deck broke. At the time Delta was merging with some other company and wasn't supplying parts. It took like 3 years to get the parts. By that time I was not going to use it anyway so it just sat. After moving I managed to get it working but not for long. Finally decided that I'm too old to mess with some tool I need and use so I popped for the new one.

Starting to look like a guitar. Finish pretty much done, even took the time to install side dots.

Can't just have one project going so I'm getting started on the next one. Using the same Stratlike body with a flame maple top. Back is a birdseye backbone with mahogany wings and walnut/bubinga accents. Plan on doing a burst finish Blue-Green-Yellow. I used the two color stain method on my 2006 build.

Came up with a set-up to install fretboard inlays after the fact. A carbon fiber plate with an opening to hold the router. I only had 2mm carbon fiber so I used carboard shims to hold up the carbon fiber so it stays flat under the weight of the router. Made the template from some left over Kydex, but plywood or anything would work. One problems is that the bit for the inlay tool isn't very long so the router base can't be more than a 3/8 in. or so above the fretboard. So, template material can't be too thick. Made a tool to match the sizes of the inlay guide ring and bit to use in aligning the template. Once the inlay was glued in, the Dremel and router base cut in down. Made for a pretty subtle 12 fret marker.

A member here (adfinlayson) has a youtube channel with some good videos. youtube.com/adfinlaysonguitars Look at his videos and any others you can find to develop a plan, pick out things that make sense to you and that match the tools you have. My advice is simply to take your time - practice and test everything before doing it on your project.

Two light coats of TruOil. Really bring out darker highlights in the wings.

Got the body sanded to 600 and ready for the TruOil. Made some gizmos for apply the TruOil. Just for fun I tossed in a picture of what's left of my first guitar circa. 1977.

This was my first attempt at a string through bridge and my drilling job was not specifically too great. Had to use my inlay tool for the router to make a patch. I do think that if I do another string through build I’ll just plan on the inlayed piece. That way you can make sure the holes are aligned and spaced correctly before mounting it.

Thanks, my idea with the center is to have a “backbone” of harder wood, sort of a neck through compromise. With this guitar I was wanting to use this wood I bought as “Asian White Mahogany”, but the pieces I have are only 4 in. wide so the center pieces were wider than I usually use. And, I have usually made the top piece from a solid book matched block without the center laminated etc.. I am a little disappointed in the glue line showing as much as it does. I would have routed out for fret markers when the board was flat, but I had planned on going without them.