Jump to content

amotz

New Member
  • Posts

    2
  • Joined

  • Last visited

Reputation

0 Neutral

About amotz

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi ADFinlayson. thanks for your fast reply. the exact distance between each post is 25.4 mm. I have already tried and was in contact eith the Framus site and warwick shop. they only offer machine heads with 25.8 mm distance between posts which is not compatible.
  2. Latly i have decided to restore an old Framus guitar. it's a 12 string accoustic guitar. It is a really nice looking guitar that had great sound ( 20 years ago). One of the item i need is a the tuning keys also called machine heads. I have ordered diffrent 2 sets of tuning keys and both where found out to be incompatible. I am mostly concerned as to the compatibility of the tuning keys with my guitar. I would greatly appreciate it if you could look at some of the pictures I took of the guitar's head and slots for the tuning keys. I measured the distances and it seems that the distance between the beginning of the first tuning key hole and end of the last tuning key hole is 5 inches, or about 127 mm. I had the misfortune to already have ordered tuning keys for the guitar and found them to be incompatible - one was 121 mm from first to last tuner and the second one was 125 mm which was close, but still too short. Words could not describe my gratitude were you able to provide assistance in locating a fitting set of tuning keys for the guitar in the exact measurements needed and the web address of the exact item. I greatly appreciate your help, Amotz
×
×
  • Create New...