Entry for November 2019's Guitar Of The Month is open - ENTER HERE!
Search the Community
Showing results for tags 'handmade'.
Found 5 results
Hello everyone!Just finished building my first guitar body and wanted to hear any feedback that you experts have! I started this project last fall (2017) and worked on it in my spare time throughout the fall and into the winter. It was slow-going, but I have finally found time to get it finished!It is solid Swamp Ash, with gold hardware purchased from various websites, and a creme-colored split-style pick guard. The dyes I used are the powdered alcohol-based dyes from Reranch. I chose their "yellow" and "extra dark walnut". It's common to find sunburst guitars, but I felt like I don't often see any line-style gradients, so I chose to do that for my staining. What you see is a light golden yellow fading into the darker brown horizontally. I applied the dyes with a spray gun on an air compressor.The gloss coat on this is Polyurethane, as I was told it's the easiest to apply for a first-timer. I think maybe a nitrocellulose might have looked even better on this guitar, but it sounded like it was much more difficult to do a good job with that, as opposed to polyurethane, but I have absolutely no complaints with my polyurethane coating on this.It is equipped with a single dog-ear style P90 pickup that I got it used from a friend out of his Gibson LesPaul Jr. for a good price. Since it came from a friend, I already knew how it sounded and knew it was in good condition, so I had no problem buying it used. I chose to install only 1 pickup because I have always loved the look of single-pickup guitars, and also because the wiring would be simpler for my first time configuring anything like this. I took a risk by purchasing a used Squier Jaguar neck from Reverb. My intent was/is to eventually build my own neck, but for now, this neck actually plays and feels MUCH better than I had anticipated. It is straight as an arrow and is surprisingly comfortable, so I'm very happy with this for the time being. The action is set comfortably low and it all feels just right. I would love to hear any feedback if anyone has any!Thank you!
Hello fellow guitarists! I have a slight problemo. I've been designing this guitar for a while and have just drawn in the frets. It's a 25" scale with 24 frets however they do not reach near to my pickups. In fact from where fret 24 is there is a 24mm gap between the fret and the pickup hole. The length from the nut to the 24th fret is bang on too. Does anyone have any suggestions as to why this may have happened and if it is bad? Cheer, ~Retuos
I Have free time and lot of wood. I'm basically a bass player so I decided to make few different basses. I will post them in one thread. They are: 1. 5str jazz bass 2. 4str jazz bass 3. neckthrough 4str jazz bass Let's start. 1. I never like a classic jazz bass design, so I decided to make my own modern looking 5str jazz bass Ash body Maple/wenge neck with wenge fingerboard, 34", 24 frets, dot markers, bolt-on Gotoh hardware, Folin pickups Jazz Bass Set.
So, good day/morning/evening to everyone. Here I want to show you my second project. I call it Angry Strat specs: sapele body with maple top maple/wenge neck with wenge fingerboard, 25" Gotoh tuners and bridge Fokin demolition passive humbuckers set
Hi everyone. I thought about my own handmade guitar last few years and I decided to do it. I have to say, that guitar is already done and I show you photos of process from woods to ready guitar Specs: sapele body with maple top maple/sapele neck with rosewood fretboard, 25,5", 24 frets Jescar stainless steel frets Fokin pickups - Demolition set (passive) Tuners, bridge - Gotoh