Voting for November 2019's Guitar Of The Month is open - VOTE HERE!
Search the Community
Showing results for tags 'japan'.
Found 3 results
I have a Tempo Guitar 4 bolt neck Japanese early 60s https://imgur.com/a/9wYxH Isn't it pretty? The jack is shot, feels weird when you put in the 1/4 inch and all you get is amp buzz, and the neck is warped a bit. Original case. Feel drawn to this little one and have some vacation time to restore it and make it sing again. What neck should I buy if it can't be trussed back into position? I took the truss cap off and it does have a truss rod. But I've never adjusted one so I'm nervous. I'd love some general advice as to how you would approach this. Thanks!
I recently purchased an Ibanez prestige S1220 body and there seems to be a crack on the surface that runs through into the body cavity. It seems stable enough for now although I worry for the future, I fear it may enlarge or even cave in the whole pot. (see picture) Any advice on reinforcing the area around the pot, possibly from inside the cavity? I was just going to cover the whole mess with a decal until I realized that it cracked through, I'm sure it happened because of the thin profile of a saber or someone over tightened the pot or both... Thanks for the help
Hi all from Yokohama, Japan! I play (bad) bass for my church band, and enjoy my MusicMan Stingray a lot. It's got the piezo pickup, and can make a nice blend, but ... it's heavy! At just a tad over 11 pounds, my aged back has been asking for a bit of relief, so decided to try my hand a building a bass ... or two. A while back, I found this slab of wood on Yahoo!Auction, our equivalent of eBay. It was supposed to be a table top, but warped a bit, and the big knot in the center was not terribly attractive ... I was the only bid at about $30 including shipping. I had no idea what to do with it. Btw, it's called Chinaberry, or "sendan" in Japan, Melia azedarach, and the berries are mildly poisonous ... and gets birds high as a kite. And I had a Hohner B2B (Steinberger licensed headless "broomstick" bass) that is light, but the strap button location and full scale = neck dive galore. I also have a 5-string Steinberger Spirit bass with a horned body that is great, but never use the low B, so took some design cues from that and thought to re-purpose the Hohner neck and bridge ... and found that I could have TWO bodies from that slab ... why not? I am working on the headless one now, and will post some pics of my progress. The second one will be a short scale (30") with a Japanese Mountain Cherry neck ... still kind of in the planning stage Warning! I am a carpenter, not a luthier, or even a luthier wannabe. My idea of tools is a hammer with a pounding end and a "fixing" end, a circular saw, and a chalkline. I love working with wood, and this is a new challenge for me, but really not out to make drop-dead gorgeous instruments so much as solid-but-interesting players. If it happens that they are attractive as well ... Yay! Cheers, all! cj