Entry for December 2019's Guitar Of The Month is open - ENTER HERE!
Search the Community
Showing results for tags 'metallic'.
Found 2 results
Last thread was just a feasability study - thanks for all your input guys - it really did help, and I continue to need feedback, as I am still only a four month old in my guitar building phase (but 30 years old in high-end woodworking / composites). I am getting my rough milled basswood body blanks from my luthier tomorrow, and he is working on my custom spec necks so I decided to start a new thread to kickoff these "different" builds. This build thread needed an easier title too, as "Elliptical cross section body for T-formed acrylic" is about as interesting as Chenglish instruction manuals. Look up that thread if you want background info on these builds. Will be posting pics of recent castings in 1/4" acrylic like this one below for a few days, as the color possibilities are endless, given the endless metallic / pearlesecent / borosilicate pigments available now coupled with the masking technique I recently figured out on this stuff. After doing a half dozen or so panels, I will be choosing three to do the first three guitars with. Kind of set on this "Fire" panel for the 2nd one and the gold / silver boro in the "Quilt" pattern as # 1. The dichroic inlay tests went very well too, so the necks will have the appropriate color inlay according to the body panel choice.
Not a typo - seems like I should have dichrocaster in quotations, but I put "build" in quotations because my Strat mod is not worthy of the title compared to the awesome real builds I've seen by most of you (still perusing through all your cool projects). I am truly impressed by what I have seen here, and blown away by the level of craftsmanship. Thats coming from a guy that majored in WW / Furniture Design at RIT back in 86 with furniture in FWW magazine's Design Book Six, so I know a thing or two about fine woodworking (just not luthiery yet). "build" also in lower case, because my goal is to cosmetically makeover some guitars in rather short time frames, so I am intentionally cutting some corners (literally, freehand with my tablesaw) for production effiicency, so some of the craftsmanship is a bit poor by my standards, as this is my first full guitar modification, so consider that issue when criticizing, but please PLEASE criticize - I need all the knowledge I can get. I have only been interested in guitars for less than two months when it hit me that these new color-changing dichroic laminates would look cool on guitars, coupled with the incredible timing in which you can now get Floyd Rose bridges in the new rainbow chrome PVD plating. So now to explain "Dichrocaster". "Dichro" is short for dichroic, which means di = two, and chro= color, a term / adjective for "color-changing" which is most commonly used as dichroic glass, Google dichroic glass and you will understand. Few are aware of the newer pigments now that are actually micro platelets of dichroic glass. These pigments are the same as used in the $5000.00 per gallon Chromalusion (DuPont) and Mystic (BASF) paints. What is super cool is I have recently found suppliers of raw borosilicate pigments with the same color shifting effects for a fraction of the said pre-mixed brands, and am using them in these strat mods (the "Dune" face acrylic). I am also using another laminate for inlays that utilizes dichroic films in the optical core, which complements the rainbow Floyd Rose and the Dune perfectly (not explaining that stuff in too much detail for fear that this post might be removed as a veiled ad attempt - this post is so I can gain knowledge and ideas from this community). So now details on this mod. Got a cheapo squire with sound body and neck, and took it to the dado blade to remove 5/16" from the face and bevel to be replaced with the 5/16" back coated "Dune" acrylic. Edges chipped pretty bad (didn't realize how thick the PE fill coat was), so next time I will pre-score the edge, but its gonna get body filler and urethane sealant anyway. I drilled the Floyd Rose stud holes first, then routed its mortice to a depth of 3/16" prior, then routed the 5/16" around it, Then re-inforced the short grain in front of the studs with oak pcs epoxied cross grain in the bridge pup cavity - will show pics if interested. I mounted the humbucker just for the photo below, but am curious from all of you why the screws were so long? I needed to cut nearly a half inch off them, and they still will be able to be adjusted plenty. The Dune acrylic face and the red inlay material all cut great with the laser, and I plan to carry the triangular "exhaust plume" deltas up through the neck in place of the pearl dots. Then will ebonize the rosewood. Planning to reshape the headstock and spray it with the same pigments as the body. I recently hired a young guitar tech to work for me in my other work, and we are doing this project together. He (Sean) has been super helpful and we are learning a ton from each other, but curious what kind of can of worms I am opening by posting this (referring to inevitable comments like "you just ruined the tone by routing off the face and gluing in acrylic" type of comments - which I would welcome anyway. My goal is not to create a great sounding guitar (will do my best in that arena), but to create an insane visual feast.