Entry for August 2020's Guitar Of The Month is open - ENTER HERE!
Search the Community
Showing results for tags 'restoration'.
Found 4 results
I figured with the extra indefinite down time I now have, it's time to fully restore an old electric guitar that's been sitting around and never worked well. Something I picked up from a roommate years ago in college. Anyway, from my research, it looks like a Japanese Vantage VS696 (that's a funny looking nine in this font). Apparently, Vantage had some well made guitars in the 80's but they are no longer in production. The electronics, including toggle switches, are pretty much shot so I gutted the whole thing. From my research, it has two volume and one tone knob; a three-way toggle at the top; and two switches under the first two knobs (one for coil split, the other phase switch). Now that I've taken the electronics out and I realize I will have some more time on my hands, I'd like to do as much as I can: refinish the frets, full set up etc. Also, there are lots of dings and scratches I'd like to touch up without refinishing the whole thing (refinishing doesn't seem plausible in the tiny condo.) I'll be ordering all new electronics, including pickups (likely Fralin Unbuckers). Anyway, now that I've convinced myself to restore this thing, I have no idea where to start but I imagine the body is the best place to begin. Any guidance, links, online tutorials, etc. that you could point me to or offer? Any clear coat finishing touch up options that you may know of? How about for work on the body, neck, frets, etc? Especially, any guidance on electronics would be helpful (I couldn't find any online schematics for this guitar) What necessary tools and supplies do I need at a minimum? Any advice on how to tackle this would be greatly appreciated. Thank you! Vantage.pdf
I want to restore an old guitar - it was the first electric guitar I ever had, and I used to love playing it. I don't know much about it - here's what I think I know. It's an Encore guitar - I believe an E76S from 1992, and it needs some tender love and care. It's missing a saddle from the bridge - but I can't seem to find a replacement bridge - or set of saddles - anywhere. The saddles appear to be 9.9mm wide, and the bridge is a tremelo style bridge - 6 mounting screws to the body - the distance between the top and bottom screw is 48.96mm. I've already bought a set of saddles from ebay - only they were too wide for the bridge. Any ideas how I'm supposed to measure a bridge to find a suitable replacement, or where I might get a replacement from? Thanks
Hi, my father gave me a bass guitar years ago. I basically have used it as art to just hang on my wall. He has always been a massive beatles fan and his birthday is coming up. The bass needs a little work. im not too worried about refinishing or restoring how it looks. i just want it to work. the input jack, volume pot, and nut are all gone. I would like to try to keep the original pickups in the guitar, but would like to redo all the other electronics while i am fixing the volume and input. What i need help with is what kind of nut, volume tone pots, and switches to use. I also need help with how to wire it all up. Also, if its not too hard to find i would like to look at getting a new bridge and pickups down the road. Do you guys know where i could find info on any of this stuff. Thanks for all the help! I am going to attach pictures of the guitar to try and help show what i need help with.
Hey guys. I haven't done a build thread before, but decided to start one in any case. I've been working on the cheap family classical guitar that we brought from South Africa (nothing special). Unknown brand "Angelica". I haven't done any sanding/gluing or any other type of DIY work before really, hence why I decided to start on this. I'm still busy with it, but thought I'd share some photos of the transformation. Before photos - lots of dings and scratches, headstock was cracked that I roughly fixed before: Will upload some more soon