AcousticSmash Posted August 23, 2004 Report Share Posted August 23, 2004 hello everyone im new. i am starting a fender strat guitar project but im stuck already. I am making a 3 single coil strat with 1 volume and 2 tone pots. now i am at the planning stage but i cant find anywhere a diagram of a strat that I can print out and use to trace onto a piece of wood to use as a template. could someone please tell me where i can find something to use for the planning stage of my project. all the tools are available but I cant figure out how to set up a template for the body Quote Link to comment Share on other sites More sharing options...
Clifford_Guitar Posted August 24, 2004 Report Share Posted August 24, 2004 Hey AcousticSmash, I had the same problem and I looked around. If you become an Advanced Supporter to Project Guitar you gain access to a Strat CAD file. You can also purchase wooden stencils through www.guitarbuildingtemplates.com hope that helps Quote Link to comment Share on other sites More sharing options...
PerryL Posted August 26, 2004 Report Share Posted August 26, 2004 If any of your friends play a strat, ask one of em if you can trace around it, then trace that onto a piece of particle board from Home Depot and away ya go. Quote Link to comment Share on other sites More sharing options...
Gorecki Posted August 26, 2004 Report Share Posted August 26, 2004 GuitarFrenzy did a great walk trough of building a strat from scratch. You may find it helpful reading. Strat Build Linky Good luck and welcome to the board. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.