Dexter Posted August 26, 2004 Report Share Posted August 26, 2004 I know it's stupid to ask for help for this problem withou any photos but I don't have a camera, but here goes. I bought a strat with custom fat fifties but since the day i first played it the bridge pu wasnt working. I opened it up yesterday and everything appeared to be fine.So what do I do.Are there some measurements I should take with a multimeter to check things out. Maybe redo the solders? Any input would be welcome. Quote Link to comment Share on other sites More sharing options...
ansil Posted August 26, 2004 Report Share Posted August 26, 2004 using a multimeter check out the continuity setting and see if the wires actually make it to ground and to the switch via from the pickup itself. if that works then measure the coil resistance and check for shorts on it. from there you can also use continutity to check to make sure the switch is actually functioning in that posisiton Quote Link to comment Share on other sites More sharing options...
Dexter Posted August 26, 2004 Author Report Share Posted August 26, 2004 I ll do that.I ll notify for any progress Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.