Jump to content

How to take the wires off?


Recommended Posts

You can do that or use a soldering iron and remove them carefully if your planing on using the original electronics again.

If you cut the wires in the middle be sure to mark each end, in my earlier days I used to just splice them back together and while it will work I wouldn't recommend it because problems can arrise.

Link to comment
Share on other sites

Depends on how the guitar is put together...I'm guessing these aren't mounted to the pick guard...

I'm guessing you're removing the controls...

I'm guessing that if you're planning on wiring it the original way all you have to do is remove the controls and probably desolder the pickup wires...then put them all back in when it's been finished...or even do it that way just to get it out quicker and desolder them later while you watch the paint dry

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...