Gigabyte Posted October 9, 2004 Report Share Posted October 9, 2004 I'm trying to wire up a high pass filter for the volume on my JS Clone. For some reason when I follow the JS1000 diagram what I get is normal volume control in the down position and in the up postion I get basically an on-off (full on for the whole sweep and then right to off when it bottoms out).... Anyone know what I'm doing wrong or have a different diagram for a high pass filter with a push-pot.....? BTW, I think the above diagram is wrong to begin with as far as the capacitors because the tone sweep only worked in the up position when I wired it up the way it showed..... I wired capacitor differently and now it works in both positions (all the time)..... Thanks for any help you guys have.... Fred Quote Link to comment Share on other sites More sharing options...
Saber Posted October 9, 2004 Report Share Posted October 9, 2004 (edited) You're right. The JS1000 diagram is wrong. Their JS1200 Diagram is okay though. And if your capacitor is too high a value, then the sweep will be like what you're getting so double-check that capacitor value, also. Edited October 9, 2004 by Saber Quote Link to comment Share on other sites More sharing options...
Gigabyte Posted October 9, 2004 Author Report Share Posted October 9, 2004 (edited) DOH! I knew something wasn't right. Thanks a million for posting that..... The JS1000 was @$$ backwards Works great now Edited October 9, 2004 by Gigabyte Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.