Radius540 Posted October 9, 2004 Report Share Posted October 9, 2004 i found 2 rare double burst guitar thta made by ibanez i got one too but its got a black finish...someone can tell me how they did it? http://www.ibanezregister.com/Gallery/Radius/gal-540r.htm just scroll down and find them Quote Link to comment Share on other sites More sharing options...
Brian Posted October 9, 2004 Report Share Posted October 9, 2004 If your talking about the black center with a black edge burst it is done using a masking sheild, least thats the way I did it on one that came through here a while back. Shoot the color first then the inside and outside burst's. Quote Link to comment Share on other sites More sharing options...
Jester700 Posted October 9, 2004 Report Share Posted October 9, 2004 Couldn't this also be done the same as any 3-tone burst, just using black as both the 1st and last colors? Or does that darken the middle color? Quote Link to comment Share on other sites More sharing options...
Radius540 Posted October 10, 2004 Author Report Share Posted October 10, 2004 cool did any of u guys saw the finish on jem 7d(ibanez)? how can u do a finish liek that? Quote Link to comment Share on other sites More sharing options...
Maiden69 Posted October 10, 2004 Report Share Posted October 10, 2004 Couldn't this also be done the same as any 3-tone burst, just using black as both the 1st and last colors? Or does that darken the middle color? you might but remember that you have to lay a lot of paint when painting over black, I will go with Brian on this, and I will suggest using an airbrush on the outer burst to have more control ov were the paint goes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.