GREGMW Posted October 10, 2004 Report Share Posted October 10, 2004 I have noticed a very ,very small split in the rosewood fretboard about the 16th fret -at the A string . I think the screw for the neck was a bit long and has split it. I removed the screw and cut a bit off it but should I try to do something with the split or let it go? Its not really noticable by eye but you can feel it.Is there any kind of filler or sealer I could use. Thanks Greg Quote Link to comment Share on other sites More sharing options...
soapbarstrat Posted October 10, 2004 Report Share Posted October 10, 2004 rosewood dust mixed with epoxy, or rosewood dust packed into the crack then super-glue drops. Then when dry, some mini-sanding blocks to carefully level and blend it in. But try to final sand in the direction of the wood grain. Not real hard to do, and it should be quite invisible. Quote Link to comment Share on other sites More sharing options...
GREGMW Posted October 10, 2004 Author Report Share Posted October 10, 2004 Thanks Soapbarstrat, I did what you suggested and it look OK. regards Greg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.