Jackson 7-string Project...

[ibanezrocker61]

Hey all! This winter I am going to be starting a project, its going to be a copy of Christian Olde Wolbers's (Fear Factory) Jackson 7-String Custom Shop guitar. Its based off the Jackson SLATQH, but his is a 7-string version with a reversed headstock:

http://www.jacksonguitars.com/gear/gear.ph...=SLATQH_Soloist

Anywho, I need to know how to make that archtop with the scalloped heel/horn like in the picture. I will also need the list of tools needed as well. So please, post if you can help me out, or email.. either or is great! Thanks! ~Mike

[!!METAL MATT!!]

I will also need the list of tools needed as well. So please, post if you can help me

well I just have a few bits of info for you I hope it help's, you could use a

drum/spindal sander to shap the scallopes iam not sure if you need a list of the tool's just for the archtop/scallopes or a list of tool's you will need to build a whole

guitar? so get back to me and I'll try to help a bit more.

!!METAL MATT!!

[ibanezrocker61]

I will also need the list of tools needed as well. So please, post if you can help me

well I just have a few bits of info for you I hope it help's, you could use a

drum/spindal sander to shap the scallopes iam not sure if you need a list of the tool's just for the archtop/scallopes or a list of tool's you will need to build a whole

guitar? so get back to me and I'll try to help a bit more.

!!METAL MATT!!

I could use the whole list of tools for building the whole guitar. I've got that down but what seems the most difficult is the archtop/scallops.

[!!METAL MATT!!]

I could use the whole list of tools for building the whole guitar. I've got that down but what seems the most difficult is the archtop/scallops.

Well you might find some helpful info hear http://www.projectguitar.com/tut/tutorial2.htm

I know there's a tutorial on how to build a LP archtop body.

!!METAL MATT!!

[ibanezrocker61]