rockytriton Posted January 18, 2005 Report Posted January 18, 2005 Ok, I'm looking to refinish an Ibanez Jem 777. I found a good site that shows step by step on sanding an ibanez and all the other steps to the process, but I'm worried about the handle. Has anyone done this with a jem? I want to make sure that I don't screw up the handle. Also, there is a little chip in the wood in the back, what would I use to fill this? Quote
Supernova9 Posted January 18, 2005 Report Posted January 18, 2005 Ok, I'm looking to refinish an Ibanez Jem 777. I found a good site that shows step by step on sanding an ibanez and all the other steps to the process, but I'm worried about the handle. Has anyone done this with a jem? I want to make sure that I don't screw up the handle. Also, there is a little chip in the wood in the back, what would I use to fill this? ← When I did the handle on mine I just used a piece of plastic pipe/rod about 1" diameter, fits the curve pretty nice. Just be careful and you won't go into it too far. For the back, standard woodfiller would do it, available at pretty much every hardware store. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.