STAHLER Posted January 19, 2005 Report Share Posted January 19, 2005 When winding pickups and you run out of wire before you have the right amout of windings on, is there a way to join a new roll of wire or do you have to start again? Thanks for reading Peace Stahler Quote Link to comment Share on other sites More sharing options...
Phil Mailloux Posted January 20, 2005 Report Share Posted January 20, 2005 Solder the end of your wire to the your next bobbin's start wire. I made a whole page of my "trials and tribulations" of winding my first pickup, including soldering those tiny little bastuds when they break. If you want to have a look on my website. Here's the pickup page. Quote Link to comment Share on other sites More sharing options...
donbenjy Posted January 21, 2005 Report Share Posted January 21, 2005 cool.. i just understood why they need to be RWRP now! not only RW or RP to be a humbucker! woo go me Quote Link to comment Share on other sites More sharing options...
STAHLER Posted February 7, 2005 Author Report Share Posted February 7, 2005 Thank you Phil, the page on your web site has helped me alot. Thanks again. Peace Stahler Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.