bigdguitars Posted January 31, 2005 Report Share Posted January 31, 2005 I have seen a couple of different models and I want somthing that I can keep inside that does not take up a whole lot of space. Delta has one that looked promising till I read the review on it. I cannot fit a floor model in my shop. Thanks, Derek Quote Link to comment Share on other sites More sharing options...
Jon Bell Posted January 31, 2005 Report Share Posted January 31, 2005 In my experience the heavier a machine is the better it performs, it usually means it is sturdier and more accurate. It's not always the case but if you're comparing two similar models it can be a good rule of thumb. Quote Link to comment Share on other sites More sharing options...
BJPUC Posted January 31, 2005 Report Share Posted January 31, 2005 i have a bench top delta and love it...its a workhorse! Quote Link to comment Share on other sites More sharing options...
unclej Posted January 31, 2005 Report Share Posted January 31, 2005 i've also got the delta benchtop and i've used a jet which was just as good. in fact, i liked the jet so much that when i needed a new table saw and band saw i replaced my old deltas with jets. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.