Jump to content

Advice On Scraping Binding?


Recommended Posts

I use those safety razor blades - the ones you can buy in packs at the hardware store. They have one sharp edge and the other edge is stiffened by a metal spine. Wrap some masking tape around the blade to leave exposed only enough blade on one end that matches or is very slightly narrower than the width of your binding. Hold the blade between your thumb and forefinger and draw the blade over the binding using your thumb/finger against the body to control the blade. Go carefully and it should work fine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...