Fluke Posted March 30, 2005 Report Share Posted March 30, 2005 Hey, I want to sunburst a nect to match a body, how is a good way to do it? Quote Link to comment Share on other sites More sharing options...
Brian Posted March 30, 2005 Report Share Posted March 30, 2005 Probably a small air brush for starters....... Quote Link to comment Share on other sites More sharing options...
mledbetter Posted March 30, 2005 Report Share Posted March 30, 2005 most sunburst necks i've seen are simpley sprayed the light color, then the dark color is blended onto the heel, and the headstock.. everywhere your hand goes is light, back of the headstock and the heel are dark to blend it back into the guitar. You could do this with ReRanch's sunburst cans. You can save a little dough though and use Behlens Jet Spray colors.. you can get a good set of sunburst tones in that line of nitro. Quote Link to comment Share on other sites More sharing options...
Devon Headen Posted March 30, 2005 Report Share Posted March 30, 2005 http://www.12fret.com/retail/wdlyJCoat.htm. That's just two tone, and I really like the three tones better, but it was the fastest thing I found. Just like mledbetter said. Quote Link to comment Share on other sites More sharing options...
marksound Posted March 30, 2005 Report Share Posted March 30, 2005 http://www.12fret.com/retail/wdlyJCoat.htm. That's just two tone, and I really like the three tones better, but it was the fastest thing I found. Just like mledbetter said. ← Nothing better than a well-done 2 tone burst. Look at the old Lloyd Loar Gibson 5 series guitars & mandos. Better than cheese on a stick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.