kanediscord Posted April 12, 2005 Report Posted April 12, 2005 hey every one, im new here, ive worked on a few projects before, but mainly les paul and strats, i recently purchased a worn down bc rich warlock to work on as a project, it has a stop tail piece bridge, and i want to convert it for either a basic trem system from a strat type or a floyd rose, preferabbly a floyd, but iv'e looked all over the web to find out if its possible, and if so, how to do it, but ive found nothing, so here i am asking the proffesionals, any help would be great, thanks Quote
Bigtommyb Posted April 12, 2005 Report Posted April 12, 2005 Remove the hardware, Make the template and use a router, put in trem. BigT Quote
scott from _actual time_ Posted April 12, 2005 Report Posted April 12, 2005 this was the most common electric guitar mod back in the late 80s / early 90s. there's a whole chapter in dan erlewine's guitar player repair guide. you can also get most of that same info in the instructions to the FLoyd tempalte set sold on the stewmac website. Quote
kanediscord Posted April 12, 2005 Author Report Posted April 12, 2005 thanks guys, you know aywhere on the net that i can find a template for measurments nd stuff? Quote
Bigtommyb Posted April 12, 2005 Report Posted April 12, 2005 Haha. Pinned at the top of the forum is a whole load of common ones. have a look through there and find 1 that matches the floyd rose you want to use. Probably the OFRs. BigT Quote
RGGR Posted April 12, 2005 Report Posted April 12, 2005 thanks guys, you know aywhere on the net that i can find a template for measurments nd stuff? Tried the search button in combination with the words Floyd & Rose?? Quote
Bigtommyb Posted April 12, 2005 Report Posted April 12, 2005 Got out that pic again! HAHAHAHAHA BigT Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.