ElGringo Posted May 26, 2005 Report Share Posted May 26, 2005 Does anyone know of a source for producing a couple custom engravings on a black neck plate? I have a custom logo I would like to have engraved into the neck plates along with a serial number. Would the Custom Laser engraving I see around on the internet work on a black neck plate? Thanks! Quote Link to comment Share on other sites More sharing options...
Devon Headen Posted May 27, 2005 Report Share Posted May 27, 2005 Look for a trophy engraving place near you. I imagine every town has one. They'll do it for you. Quote Link to comment Share on other sites More sharing options...
RGGR Posted May 27, 2005 Report Share Posted May 27, 2005 I have a custom logo I would like to have engraved into the neck plates along with a serial number. Something like this I suppose. Quote Link to comment Share on other sites More sharing options...
Shamrock Posted May 28, 2005 Report Share Posted May 28, 2005 I agree, a trophy shop would be your best bet. If you can't find a trophy shop, check with your local sporting goods store, they will be able to refer you to one. Be aware that the custom logo will probably carry a pretty hefty set-up fee. If you are going to need more than one of the neck plates, it would probably be cheaper to have them engrave several at one time. Just make sure to specify that you want them numbered sequentially (or however you want the numbers , I'm assuming you'll want different numbers on each one) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.