Cerb Posted November 3, 2005 Report Share Posted November 3, 2005 Here is what I need: Basically it is just a jazz bass neck with a paddle headstock and 18" extension that is tapered with the rest of the neck. Quote Link to comment Share on other sites More sharing options...
spyykko Posted November 3, 2005 Report Share Posted November 3, 2005 Here is what I need: ← There you go (a metric dxf-file, 68KB): http://seppopyykko.net/roska/bassokaula.DXF or DWG 40KB http://seppopyykko.net/roska/bassokaula.DWG Allthough I really don't understand why it had to be drawn with CAD, you had everything to draw it by hand to a large sheet of paper in five minutes. Quote Link to comment Share on other sites More sharing options...
Southpa Posted November 3, 2005 Report Share Posted November 3, 2005 (edited) PM me your email address and I'll send you your drawing. Done to your specs and actual scale on ACAD 2005, dwg file. Just curious, I hope your dimensions are right, that seems like a mighty long neck piece (assuming neckthru guitar) even for a bass. Edited November 3, 2005 by Southpa Quote Link to comment Share on other sites More sharing options...
Cerb Posted November 3, 2005 Author Report Share Posted November 3, 2005 There you go (a metric dxf-file, 68KB): http://seppopyykko.net/roska/bassokaula.DXF or DWG 40KB http://seppopyykko.net/roska/bassokaula.DWG Allthough I really don't understand why it had to be drawn with CAD, you had everything to draw it by hand to a large sheet of paper in five minutes. ← I'm needing it so that I can have a guy cut it out on MDF with a laser cutter. I don't have the resources to make the nice straight lines that I could get with a CNC. PM me your email address and I'll send you your drawing. Done to your specs and actual scale on ACAD 2005, dwg file. Just curious, I hope your dimensions are right, that seems like a mighty long neck piece (assuming neckthru guitar) even for a bass. ← All 18" of the extension will not be used. That was just a rough measurement with a few inches to spare. The neck will be used for a bass (standard scale of 34"). Oh, and you have a PM. Quote Link to comment Share on other sites More sharing options...
spyykko Posted November 3, 2005 Report Share Posted November 3, 2005 I'm needing it so that I can have a guy cut it out on MDF with a laser cutter. I don't have the resources to make the nice straight lines that I could get with a CNC. ← OK, that explains it. If you are using laser, then you'll probably need the dxf -file instead of dwg. Quote Link to comment Share on other sites More sharing options...
1576 Posted November 3, 2005 Report Share Posted November 3, 2005 If its being cut by laser then I would suggest that you have it made in thick plexiglass/acrylic instead of MDF. The reason being that its much more of an advantage having clear templates, to avoid defects in timber and to aid alignment. Quote Link to comment Share on other sites More sharing options...
Cerb Posted November 3, 2005 Author Report Share Posted November 3, 2005 The problem with that is that I'm having it done by guitarbuildingtemplates.com. I have contemplated sending him a piece of acrylic to do it on, though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.