Tama Posted November 5, 2005 Report Share Posted November 5, 2005 is a 2.5 degrees neck angle enough ? with a TOM brigde. Quote Link to comment Share on other sites More sharing options...
MzI Posted November 5, 2005 Report Share Posted November 5, 2005 To figure out the correct angle you need to draw a full scale cross section. Include the height of your bridge off the body, your neck angle, and also the height you want of the strings off the fret board, O and also dont forget the nut cuz thats a major thing too. If I didnt explain enough do a search on it cuz im sure there is a ton of info plus a tutorial or maybe a really good thread that explains it better. gluck MzI Quote Link to comment Share on other sites More sharing options...
brian d Posted November 5, 2005 Report Share Posted November 5, 2005 Or you can try play around with all the variables using this site neck angle calculator before you do the full scale drawing.....but you will have to do the drawing eventually before you put tools to wood. Brian. Quote Link to comment Share on other sites More sharing options...
rhoads56 Posted November 5, 2005 Report Share Posted November 5, 2005 why is it that people STILL cant see the pinned topic on this subject?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.