MadSkillzMan Posted December 9, 2005 Report Share Posted December 9, 2005 guys im quite stumped im trying to wire my restored aria diamond. It has 2x single coils, and i had to score a new switch. It was much like the old one. It has the output pole in the middle, and 3 poles on each side of it, so 6 poles. Theyre connected though, so it looks like this: *_____* *__*__* *_____* For the life of me, i cant figure out how to make it so BOTH pickups go on. I can easily figure out 1 pickup at a time, but not both...though i havent tinkered yet, i assume if i bridge anything on the switch, ill get both pickups when i dont want both ANy infto id really appreciate it guys, thanks in advance Quote Link to comment Share on other sites More sharing options...
lovekraft Posted December 9, 2005 Report Share Posted December 9, 2005 Get hold of a mulitmeter, and find out what terminals connect in each switch position using the continuity setting on the meter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.