NinjaTaiken Posted December 22, 2005 Report Share Posted December 22, 2005 Stewmac says you have to peel off the coating with a knife and be careful not the cut the wire, and I doubt I can scratch a wire thinner than my hair without breaking it. Any tips on how its done? Quote Link to comment Share on other sites More sharing options...
ansil Posted December 22, 2005 Report Share Posted December 22, 2005 i use sandpaper on mine. or an emry board. and just tape it to a table or something flat. a good xacto knife with the wire taped down is easy enough to scrape it off. but it helps to have a magnifying glass so you can really se what you are doing. Quote Link to comment Share on other sites More sharing options...
NinjaTaiken Posted December 22, 2005 Author Report Share Posted December 22, 2005 i use sandpaper on mine. or an emry board. and just tape it to a table or something flat. a good xacto knife with the wire taped down is easy enough to scrape it off. but it helps to have a magnifying glass so you can really se what you are doing. ← Okay... I have a 4" diameter one here somewhere heh. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.