Wiring Diagram Needed

[deanbo]

I am the proud owner of a lovely Peavey wolfgang and up to know i've only swapped the trem for a new Schaller 2 floyd,which is my favourite and it all works great.

Now i have 2 x 4-conductor Humbuckers with a Gibson style pickup selector switch middle being both ON.The mod i want is to be able to select the 2 inside coils of the humbuckers,but i can't find any wiring diagram that shows how to do it.

I have 1 500K volume pot and NO tone pot and i would still like to be able to have the switch in the middle position,giving me both ' Buckers ON.

I realise i might need at least a push pull pot to do this as there's No Way i'm drilling any holes in my quilt top.

I already have some push pull pots and just need a wiring diagram to show me how to do it.

I've done plenty of pickup mods before and can solder well,just never done this one before.thanks.

Dean.

[lovekraft]

Simply locate the coil joint (where two wires are soldered together and taped off) on each pickup, and connect a DPDT switch so it shorts the bridge pickup's coil joint to ground and the neck pickup's joint to hot. Easy peasey!