Jump to content

How To Re-wire My Squier Bullet


icetrey

Recommended Posts

I got a Squier Bullet for Christmas just to practice my painting before I dpainted my Tom Delonge. Problem is, I made the mistake of not remembering how it was taken apart (electrically). I know that Fender has a site with all the wiring diagrams but they don't have one for Squier and there's also to Squier Bullets. One that has only one pickup (the one I wanted) and one with three pickups (the one I got). So I need to know how to wire it up. If you need more information as far as what all wires I have just let me know and I'll tell ya. Thanx for the help.

Link to comment
Share on other sites

I got a Squier Bullet for Christmas just to practice my painting before I dpainted my Tom Delonge. Problem is, I made the mistake of not remembering how it was taken apart (electrically). I know that Fender has a site with all the wiring diagrams but they don't have one for Squier

I'm pretty sure the wiring is the same, whether it's a Fender Strat or a Squier Strat. Most other Strat copies are probably pretty much the same, too. So this page was created for anyone who finds they need to "retrace their steps" back to before the wiring job went askew: Stock Stratocaster Wiring.

The schematic diagram and the other pic (at the bottom of the page) should get you back on track.

and there's also to Squier Bullets. One that has only one pickup (the one I wanted) and one with three pickups (the one I got).
The one with a single humbucker (and no tone control) is a "Bullet Special." I've got one, which right now is in Double Drop-D tuning. Eventually I'm going to put a new pickup and other mods into it.

Hope this helps.

--

Doug C.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...