Davis guitars Posted May 10, 2006 Report Share Posted May 10, 2006 in getting ready to route the body for the arch top of the guitar, and i was wondering are there any inperticular measurements that i need to fallow to rout out tht channles? plz help Quote Link to comment Share on other sites More sharing options...
PunkRockerLuke Posted May 10, 2006 Report Share Posted May 10, 2006 you can decide on whatever cavity size & shape you want them to be. I may be able to help but it depends on if I can find the measurments I wrote down or not. Quote Link to comment Share on other sites More sharing options...
Setch Posted May 10, 2006 Report Share Posted May 10, 2006 The wiring channels? I just use a 1/2" flat cutter, and run a diagonal line from the toggle switch, through the pickup ears, and into the control cavity. If you don't have the toggle on the upper bout, it's even easier. Here's a Les Paul: Here's a LPDC style Or do you mean the 'steps' which you can use to rough out the carve? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.