f2droc Posted June 1, 2006 Report Share Posted June 1, 2006 It seems that on my first coat I went a little too wet to start. I didn;t notice until I was done coating. I started with the back so it's not the end of the world. The bottom looks ok. But the top is just full of large drips. I tried sanding with 300 but it doens't seem to be working so well. Should I just keep sanding or should I go with a chemical? Thanks Quote Link to comment Share on other sites More sharing options...
Southpa Posted June 1, 2006 Report Share Posted June 1, 2006 Cut the drips down with a razor when they are still soft. Then let it dry and sand back to level. I've avoided excess drips by spraying with the guitar laying flat. That way things level out somewhat. Quote Link to comment Share on other sites More sharing options...
f2droc Posted June 1, 2006 Author Report Share Posted June 1, 2006 I've already gone chemical on it. took like 5 mins and now it's like new (ok it's still got some black stains but I'm doing a solid black) If i get more drips I'll keep that in mind. Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.