RG_Bandit Posted June 20, 2006 Report Posted June 20, 2006 hello i want to make a guitar so i am finding all the parts i will need. I still need a nut, so i went to a website where they sell parts but when i searched for nuts i found out that they only had locking nuts. So my question is, i wanna make a guitar with a Hipshot / HIP-41100B bridge, can i use a locking nut with this bridge. thank you Quote
Nitefly SA Posted June 20, 2006 Report Posted June 20, 2006 it may cause tuning problems, but you certainly could. Did you look at stew mac? they have a lot of nuts (stop laughing) Quote
ryanb Posted June 20, 2006 Report Posted June 20, 2006 Stay away from locking nuts for that trem. (You could use locking tuners if you want.) There are plenty of suppliers where you can get nuts. Quote
RG_Bandit Posted June 21, 2006 Author Report Posted June 21, 2006 i found what i was looking for thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.