sepultura999 Posted August 26, 2006 Report Share Posted August 26, 2006 With stewmacs custom table saw fret slotting blade, I know you can use a table saw and a radial arm saw to cut fret slots. What about using a cheap compound mitre saw? cheap saw -Jamie Quote Link to comment Share on other sites More sharing options...
jay5 Posted August 26, 2006 Report Share Posted August 26, 2006 I doubt that would work. Setting it up to cut with a template would be tough. You could certainly just pick up a cheap ($100) table top table saw that would work fine. Quote Link to comment Share on other sites More sharing options...
fryovanni Posted August 27, 2006 Report Share Posted August 27, 2006 That saw does not look like it has a sliding arm. It needs to slide, and needs to be made very well for consistent slotting. Look at craigs list in your area for used radial arm saws Peace,Rich Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.