Jump to content

High-bypass Filters On Controls


Logical Frank
 Share

Recommended Posts

I did this mod to my SG yesterday:

http://www.guitarnuts.com/wiring/volpass.php

I used .001 uf caps and it sounds great on the bridge but I'd still like a little more highs to come through from the neck when I back off on the volume. Could I use a lower valued cap to get a little more highs through?

Also--this is just an idea I had--could I put a high-bypass cap on my tone control as well? I'm still trying to wrap my brain around how all this stuff works but it seems like it would be a cool mod. If my thinking is correct, this would turn the tone control into sort of a mid-scoup so I could get my amp to clean up a wee bit w/o necessarily turning down the volume.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...