Page_Master Posted October 2, 2003 Report Posted October 2, 2003 hello everybody can anyone give me a DXF file w/ 1:1 scale of a template of a humbucker that is print ready? thanx! Page. Quote
guitar_ed Posted October 2, 2003 Report Posted October 2, 2003 Hi, Checkout Melvyn Hiscocks book on building guitars. There is one in there. Guitar Ed Quote
krazyderek Posted October 2, 2003 Report Posted October 2, 2003 why do you need a to scale DXF? it's essnetially just 2 rectanges overlaping each other, i made my own using the following measurements i came up with from the pickups i own, i use a 1/16 side wall thick bushing on my router for direct mounting cavitites or you could just use the template with a template router bit for regular covered pickups BTW the best way to make this yourself is using a straight edge/square and a flush trim bit, these measurements work best with a 1/4" flush trim, and 1/4"template cutter when routing the wood) THIS PICTURE IS NOT TO SCALE Quote
daveq Posted October 2, 2003 Report Posted October 2, 2003 If you don't want to do it yourself, you could go with the stewmac template: Pickup Template Quote
Page_Master Posted October 3, 2003 Author Report Posted October 3, 2003 cheers dudes this is exactly what i wanted. a template would have made my life easier but this is pretty much all i need. the measurements. thanx again. Page. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.