thewongster Posted January 9, 2007 Report Posted January 9, 2007 Can someone tell me the best way to slap on a 5/16 inch veneer to the front and back of my guitar? glue? and I dont plan on using a binding, so should I glue it on oversized, then use a router to go flush against? then use a roundover? Quote
JasonBird Posted January 9, 2007 Report Posted January 9, 2007 when you say veneer, do you mean multiple plies of backer with the decorative wood on top? or just thin solid wood? with either, wood glue should be suficient, a thin layer spread across the whole surface. Make sure that you have a backer board to clamp to to keep it all flat. oversized and then flush rout off the excess... JasonBird Quote
thewongster Posted January 10, 2007 Author Report Posted January 10, 2007 It is actually more of a top. and I want it on the back side too. can someone tell me the thickness of a telecaster? Quote
Bertbart Posted April 2, 2007 Report Posted April 2, 2007 Telly's are usually 1 & 3/4"...have seen thicker, say 1 & 7/8" Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.