Blend Pot Does Not Blend

[LeftyLug]

HI, put a blend pot in a guitar in place of 3-way, both pick-ups work individually but in center position neither works. Guitar wired as in schematic http://www.seymourduncan.com/support/schem..._1v_2t_3w.html) but no 3-way. Wired blend pot by diagram on Stew-Mac site.

http://www.stewmac.com/shop/Electronics,_p...37.html#details

Any ideas? Thanks

[verhoevenc]

If there's NO sound... you must be accidentally sending the signal to ground... check where your grounds are going.

Chris

[LeftyLug]

If there's NO sound... you must be accidentally sending the signal to ground... check where your grounds are going.

Chris

Thanks, I'll double check the wiring

[LeftyLug]

If there's NO sound... you must be accidentally sending the signal to ground... check where your grounds are going.

Chris

Thanks, I'll double check the wiring

Chris, I re-wired the electronics, it's all good now. Must have been the ground.

Thanks, Mike