darwinphilosophy Posted February 8, 2007 Report Posted February 8, 2007 Ok I have been searching the forums for ideas about sunbursts and obviously I am new to this forum and relatively new to refinishing. I have a few questions if anyone could answer them First off I am redoing a p-bass and am interested in putting a flame maple top on but I dont know how to fit it right is there a way to add like bindings or anything...Also I was going to do a sunburst but am unsure of the best finish for flame maple maybe there is a better idea you know of other than sunburst, I am planning to stain the rest of the guitar a dark color but any design ideas from experienced people would be nice..... Also I have noticed that the actual base may be longer than the veneer which is 20" and the guitar is like 21" so I also have to get around that problem...And if i was to do a sunburst I would most likely do a rub on so where is the best place to find the dyes?... thank you Quote
dawgy Posted February 27, 2007 Report Posted February 27, 2007 I've always goten my stains and dyes at Stewart MacDonald. Quote
Mattia Posted February 27, 2007 Report Posted February 27, 2007 StewMac's TransTint dyes are nice. Wish I could get good metal-acid complex dyes here that will dissolve in waterbased and/or nitro and/or alcohol, but so far, no luck...curse shipping restrictions! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.