Jump to content

Custom Wiring Help!


grungehead

Recommended Posts

What do you want the other two positions of the switch to do? Both pickups on for both positions (you can just use the volumes for pickup selection), or are you looking to do something fancier? What I just described is pretty simple, but it seems like a waste when you have the other position to work with. Check out this website:

http://guitarelectronics.com/c=gWP7z1RSxfv...iringresources/

It's got everything you need to cobble together some anything but the most absurd wiring configurations.

Link to comment
Share on other sites

On my first electric I soldered a wire to the copper shielding and joined all the earths from pickups, toggle switch, and output jack to it. The pots are earthed from contact when mounted up.

Works well although If the case of the pot ever oxidizes after many years it may cause earthing problems, so my builds since then I solder them to the pots as is the norm.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...